Type: BF-C-001
Volume: 1450MM×850MM×1180MM
Weight: 450KG
Power supply: 12V 50AH, 380V
Toyota A340E automatic transmission assembly, electronic control system assembly, experimental test panel, original car instrument, movable metal bench, speed control motor, etc.
1. The torque converter is driven by a speed-regulating motor to simulate the power output of the engine,
2. Dynamic display, through the liquid crystal instrument, digital voltmeter, digital pressure gauge to test various dynamic data.
3. Detection function, through the experimental test panel and OBD diagnostic socket, combined with the fault detector, the automatic transmission ECU, sensors, and actuators can be detected and analyzed.
4. Test the hydraulic system by simulating dynamic working conditions
1. Understand the working principle of automatic transmission, shift process and movement process of internal components.
2. Select Toyota A341E automatic transmission, dissect the automatic transmission locally, use compressed air instead of hydraulic transmission hydraulic oil as the power transmission medium, and use the motor as the input power source. When the motor drives the input shaft of the automatic transmission to operate, the internal operation of the automatic transmission can be clearly observed through the dissecting window.
3. Each brake and clutch of the automatic transmission is driven by a separate air circuit, which controls the action of the corresponding solenoid valve, connects and controls the air circuit of the corresponding clutch and brake, and realizes the gear shift of the transmission. There are various gear shift switches on the gearbox training platform, and you can select any gear position to observe the transmission operating status.
4. Equipped with a control module for automatic transmission shifting. The A340E automatic transmission teaching and disassembly software is used to control the automatic transmission shift control module to realize the automatic upshift and downshift work of the dissecting operating table.
5. Equipped with a movable bracket and caster brake device, and the surface of the bracket is sprayed with plastic.
6. Equipped with a 7-inch tablet computer, which is installed on the display panel of the operation console or training platform, and the A340E automatic transmission teaching and virtual disassembly software is installed on the tablet computer.